How Do I Adjust The Sensitivity Of My Xbox One Controller

Prepar3D is most realistic when you use a joystick, yoke, or other controller. You can fly more than precisely, and the buttons and controls make information technology easy to change views, suit the throttle, extend or retract the landing gear and flaps, and operate other shipping controls. The Xbox 360 Controller for Windows combines the ease of a joystick with the ergonomics of a game controller.

Prepar3D is compatible with joysticks, yokes, game pads, and other controllers supported past Microsoft Windows and the DirectInput device standard. Use the device that works best for you lot as your primary command, and customize information technology to suit your needs. Many products characteristic dissimilar configurations, then refer to your controller's documentation for its push button assignments.

Before you fly, make sure your Xbox 360 Controller is:

Plugged into your estimator.
Enabled in Microsoft Windows (betoken to Start/Settings/Control Console/Game Controllers).
Calibrated properly (encounter Calibrating Your Controller).

Also make sure you have the latest device drivers. If in doubt, download and install them from the Microsoft.com Web site.

Controller Commands

Depending on your controller, you'll probably have buttons for frequently used controls and for cockpit views, simply you'll still demand to utilize the mouse or keyboard for other functions.

Action	Command
Increase throttle	Press button Y
Decrease throttle	Press push B
Apply brakes	Press push button A
Drop object	Press button 10
Left rudder	Printing left trigger (one)
Right rudder	Press right trigger (2)
Climb/Descend	Left thumbstick dorsum/forward (5)
Bank left/correct	Left thumbstick left/correct (five)
Look around	Move right thumbstick (6)
Cycle Mission pointer/compass land	Press right thumbstick (half-dozen)
Trim olfactory organ up	Press D-pad down (7)
Trim olfactory organ down	Printing D-pad upward (7)
Extend flaps incrementally	Press D-pad correct (7)
Retract flaps incrementally	Press D-pad left (7)
Landing gear extend/retract	Press right shoulder button (four)
Spoilers extend/retract	Press left shoulder button (3)
Suspension simulator	Press Offset push button (9)
Terminate flight	Press Back button (8)

Customizing Controller Assignments

Apply the Controls Assignments dialog box to customize controller assignments to suit your flying manner.

To alter controller button commands

On the Options menu, point to Settings, and and so choose Controls.
Click the Buttons/Keys tab.
On the Calibration tab, select the Xbox 360 Controller from the Joystick type listing.
Select either the Normal or Slew Mode option.
In the Event category list, choose the category of events that you want to set.
In the Assignment listing, select the event that you want to assign to a different controller button.
Click Change Consignment. The Select Assignment dialog box will open.
Press the controller push that yous want to utilize for the selected event. If the push is currently being used and you don't desire to supercede information technology, click the Clear button.
Click OK.
Make whatever additional changes you lot want using steps 3 through 9 above.
Click OK.

The Xbox 360 Controller for Windows has two thumbsticks that act like joysticks. Y'all can change the axes assignments for each thumbsticks.

To alter thumbstick axes

On the Options menu, point to Settings, and and so choose Controls.
Click the Joystick Axes tab.
Select either Normal or Slew Mode.
In the Consignment list, select the event that you want to set up to a different joystick axis.
Click Modify Assignment. The Select Consignment dialog box will open.
Motion the joystick axis that you want to use for the selected upshot. If the centrality is currently being used and you don't want to replace it, click the Clear push button.
Click OK.
Make any additional changes you want using steps 3 through vii above.
Click OK.

Calibrating Your Controller

If your Xbox 360 controller seems to be behaving erratically, you may need to calibrate it.

To calibrate your controller

Make sure your controller is plugged in and installed co-ordinate to the manufacturer's instructions.
On the Options menu, point to Settings, and so choose Controls.
Click the Calibrate tab.
Click Calibrate.
Click Properties.
On the Settings tab, follow the instructions onscreen.
Click OK.

Adjusting Controller Sensitivity

Prepar3D's preset sensitivity for joysticks is in the heart of the range, and the response rate is average. Y'all can adjust these sensitivities; experiment to find the setting you lot like best.

"Sensitivity" refers to how sensitive the joystick is for a given axis. For example, with high sensitivity, the slightest motility of the joystick will have a big outcome on the aircraft'southward controls in Prepar3D.

"Zilch Zone" refers to how much "dead space" there is in a given joystick axis center position. For case, with a big null zone, you volition be able to move the joystick slightly before it has an effect on the aircraft's controls in Prepar3D.

To arrange the sensitivity of your controller thumbsticks

Make sure your controller is plugged in and installed according to the manufacturer's instructions.
On the Options menu, betoken to Settings, and and so cull Controls.
On the Calibration tab, select the Xbox 360 Controller from the Joystick blazon list.
To adjust the sensitivity for all axes simultaneously, click the Elementary pick, then drag the Sensitivities-all axes and Null zones-all axes sliders to the settings you want.
-or-
To arrange the sensitivity for each for each axis separately, click the Advanced option, and so select each axis and drag its Sensitivity and Null zone sliders to the settings yous want.
Click OK.

Notation
To reset all sensitivity options to their default values, click the Reset Defaults button.

Adjusting Controller Forces

You tin enable or disable force-feedback options. Be aware that the Xbox 360 for Windows Controller does not back up all of the forces listed in the dialog box.

Crash effects: If you crash, the controller volition vibrate.
Ground bumps: As you coil beyond the ramp, taxiway, and runway, the controller will vibrate.
Landing gear: When you retract or extend the landing gear, the controller volition vibrate.

To adjust controller forces